CETA Standard Leak
The CETA standard leak can be used for the quick and comfortable monitoring of the CETA leak detectors according to the documents of the quality assurance department. At a selected pressure this calibration device has a defined flow (ml/min). By connecting the standard leak to the measuring circuit of the leak tester a determined leak can be simulated. This procedure enables the check of the correct adjustment of the test equipment and/or the entire test system including the adapter fixture within seconds. The CETA standard leak is supplied with a calibration certificate.
[zoom] For a detailed view please click on the picture
With the CETA standard leaks the following range of flows (depending on the pressure) can be covered (except from the list of deliverable leaks):
In case the required value is not listed in the CETA standard leak table, a customized leak can be manufactured.
