Leak Detector CETATEST 510
The CETATEST 510 is a full automatically working leak detector for the detection of untight parts within the cycle time of the production process. The leak detector is available in three different types: The configuration “closed components - high resolution” can be used for test parts, which can not be filled, so called “closed components”. It is possible to detect very small ratios of test part volumes. The type “pressure loss - high speed” can be used for leak tests of very small test parts in high speed production cycles. The configuration “pressure rise” has a very high measurement signal and integrated components (e.g. stop valve, primary pressure control).
[zoom] For a detailed view please click on the picture
| Sensor type | Piezo-resistive differential pressure sensor |
| Measurement range | 400 Pa in 1 Pa-Steps |
| Result units | Pa, Pa/s, ml/min, ml/h |
| Pressure controller | electronical (primary pressure), mechanical (secondary pressure, type “pressure rise”) |
| Test pressure sensor | Piezo-resistive gage pressure sensor |
| Test pressure ranges | Negative gage pressure, 200 mbar, 1 bar (type “pressure rise”: up to 100 bar) |
| Test modes | Pressure loss measurement, test of closed components in high resolution (option A), high speed pressure loss measurement (option B), pressure rise measurement (indirect) (option C) |
| Dimensions | 345 mm x 145 mm x 435 mm (W x H x D) |
| Typical applications | Tests of micro switches, sensors, relays, valves, watches |
