Leak Detector CETATEST 815
The CETATEST 815 is a full automatically working leak detector for the detection of untight parts within the cycle time of the production process. The pressure in the test part volume is compared with the pressure in a tight reference volume. The CETATEST 815 can be equipped with a multitude of test modes and is applicable for a lot of applications. The 24 Bit AD converter und ist high clock rate allows short test times.
The CETATEST 815 can be delivered as 2 channel test device.. Parameter can be exported resp. imported using an USB storage device. And measurement series and measurement curves can be stored.
[zoom] For a detailed view please click on the picture
| Sensor type | Piezo-resistive differential pressure sensor |
| Measurement range | 500 Pa in 1 Pa steps, 5.000 Pa in 1 Pa steps |
| Result units | Pa, Pa/s, hPa, hPa/s, psi, ml/min, l/h, mbar*l/s |
| Pressure controller | mechanical, electronical |
| Test pressure sensor | Piezo-resistive gage pressure sensor |
| Test pressure ranges | Negative gage pressure, 1 bar, , 6 bar, 9 bar, 10 bar, 30 bar, negative gage pressure and positive gage pressure ranges can be combined (-1/+1 bar, -1/+4 bar, -1/+6 bar) |
| Test modes | Pressure loss measurement, dynamic pressure test (option), test of closed components (option), pressure steps (option), prefill (option), fill curve analysis (option) |
| Dimensions | 345 mm x 145 mm x 435 mm (W x H x D) |
| Two channel operation | as option available |
| Typical applications | Components that should be waterproof, oil-tight or gas proof |
