Factory Calibration
The factory calibration laboratory of CETA Testsysteme GmbH can carry out factory calibrations for the measurand pressure and for the measurand flow.
[zoom] For a detailed view please click on the picture
Measurand Pressure
Factory calibrations are carried out using DKD-calibrated reference devices. The traceability of the used measurement devices is documented. By factory calibrations the pressure measurement range from –1 bar to +20 bar can be covered.
Measurand Flow
The flow measuring range from 0,1 ml/min to 220 l/min can be covered by factory calibrations. The used calibration standards are recalibrated by approved institutes.
Remark: DKD is the abbreviation of “Deutscher Kalibrierdienst” (German Calibration Service).
