CETA Testsysteme GmbH starts every project with a feasibility evaluation. This standard practice is used to ensure that the requirements regarding the test process can be fulfilled. If the technical feasibility is proved a quotation is worked out and a suitable test device, additional functionalities, further equipment and accessories are offered.
 
The main steps of the feasibility evaluation are:

• Information exchange regarding the requirements of the test process, the test part and the industrial conditions
• Estimation of the measurement range and the required resolution of the test device
• Choice of an appropriate test device
• Determination of test parameters matching the requirements of the test process
• If the feasibility can not be assured just by calculation, in some cases practical experiments with test parts are performed
• Decision about the feasibility
• Internal documentation of the test (including sketches, parameters, test series)
• Elaboration of a quotation

As the feasibility evaluation is done before giving a quotation, the customer can be sure that the proposed solution can be realised.

A more advanced service are feasibility studies. These consist of the following main topics:

• Systematic and detailed research of the test process
• Practical tests with test parts
• Series of measurements to prove the capability of the test process (e.g. Cg-value)
• Disclosure of all data, parameters and series of measurements
• Practice-oriented evaluation of the measurement results
• Recommendations regarding the optimization of the test process
• Tips for the change of the design of the test part in order to achieve a better product quality and / or to improve the test process
• Detailed final report