Leak Tester CETATEST 715

The CETATEST 715 is a full automatically working leak detector for the detection of untight parts within the cycle time of the production process. The leak tester uses a gauge pressure sensor and has a large measurement range. Therefore the CETATEST 715 is especially qualified for the simple testing of parts with large leakages. The test modes “test of closed component” and “dynamic pressure test” can be integrated on demand.

This is now also available as a dual-channel version and allows simultaneous leak testing of two test pieces.

 

Special variant CT 715 LV (Large Volume) for leak testing of large-volume test pieces (up to 1000 l volume)

  • Leak tester with overpressure sensor for the packaging industry
  • Integral leak test of large-volume containers
  • Test parts: Plastic bottles, canisters, drums, IBCs (Intermediate bulk containers)

  

Leak Tester CETATEST 715
CETA tests shower heads with the CETATEST 715 Leak Tester
CETA Testsysteme GmbH has a special variant CT 715 LV (Large Volume) for leak testing of large-volume test pieces (up to 1000 l volume) now
 

Examples of test parts that CETA customers test with the CETATEST 715.

Sensor type Gauge pressure sensor
Pressure ranges -1 bar, 200 mbar, 1 bar, 6 bar, 10 bar, 16 bar, 20 bar, negative gauge pressure and positive gauge pressure ranges can be combined, (e.g. -1 bar/+1 bar, -1 bar/+6 bar)
Measurement range Max. +/-10,000 Pa, depending on the test pressure (resolution: 1 Pa)
Result units Pa, hPa, PSI, Pa/s, hPa/s, mbar*l/s, ml/min, ml/h, l/min, l/h, mmHg, mmWs, Torr
Pressure controller Mechanical, electronical
Test modes Pressure decay measurement, dynamic pressure test (option), sealed component (option)
Dimensions 345 mm x 145 mm x 435 mm (W x H x D)
Typical applications Tests of sanitary armatures, plastic weldings, ball valves