Hydrogen Leak Tester down to 10-6 mbar*l/s

CETA Testsysteme GmbH offers now leak testers, which are able to detect leak rates down to 10- 6 mbar*l/s. This leak tester allows wide application possibilities not only in the gas-based testing of moldings and components, but especially in the leak test of gas-filled or liquid-filled product packaging and molded components and parts.

Advantages:

•    Broadband measurement of various ingredients
•    Specific measurement of tracer gases
•    Pressureless test with high-sensitivity sensor
•    Test times less than 10 s
•    Versatile usability through all phases of packaging and process development
•    Suitable for 100% inline control or as an end-of-line test
•    Modular design allows cost-effective scalability even for higher throughputs
•    Lowest operating costs

Hydrogen Leak Tester
Grafic Leak Tester up to 10-6 mbar*l/s

Get more information here: +49 (0) 2103 / 2471 – 75 or send an e-mail to sales@remove-this.cetatest.com

Measuring method The measuring method is based on the detection of gases or vapors evaporating from a test part or a packaging in case of a leckage. The test medium escaping from a leak in the test part is accumulated in a closed test chamber (accumulation). The gas volume from the chamber passes the sensor and the resulting signal is measured (injection)
Detection limit Down to 10-6 mbar*l/s
Detectable gases All reducible and oxidizable gases. Typical test gases and vapors: forming gas 95/5 (95% Nitrogen and 5% Hydrogen), alcohols, solvents and other volatile organic gas- and vapor mixtures.
Configuration Sensors for pressure, flow, humidity (optional), running an external test chamber, sensor, heat and valve control, touch screen, USB port
Typical areas of application Automotive (e.g. tilt sensors)
Pharmaceuticals (e.g. inhalator cartridges)
Cosmetics (e.g. aerosol cans)
Consumer (e.g. mobile camera lenses)
Food (e.g. MAP packaging)
Interfaces LAN (optional), Proprietary, extensible module interface (on demand), Profibus (optional), additional automation interfaces (on demand)
Dimensions 465 mm x 198 mm x 315 mm (B x H x T)