Mass Flow Tester CETATEST 615
The CETATEST 615 is a fully automated mass flow tester for the detection of small leaks in large volume test parts. The measurement method is based on the principle of the thermal mass flow measurement.
By using a previously pressurised reservoir volume leakages can be measured without the disturbing effects of a pressure regulation. Temperature effects are automatically compensated. The mass flow caused by the leakage is displayed directly for standard conditions, which can be parameterised.
In the right picture: Examples of test parts that CETA customers test with the CETATEST 615.
| Sensors | Gauge pressure sensor, thermal mass flow sensor |
| Pressure ranges | 200 mbar, 1 bar, 2 bar, 6 bar, 10 bar |
| Measurement ranges | 0-10 ml/min, 0-25 ml/min, 10-600 ml/min |
| Result units | Nml/min, Nml/h, Nl/min, Nl/h, scc/min, scc/h, sl/min, sl/h, mbar*l/s |
| Pressure controller | Electronical pressure regulation for the filling of the reservoir volume |
| Dimensions | 345 mm x 145 mm x 435 mm (W x H x D) |
| Typical applications | Big headlights and lamps, oil and water circuits |